Professional

RCCMD Software

UPS managing and monitoring in a heterogeneous IT networks, where different platforms coexist, becomes almos impossible, because the less common operating systems on the market do not have that such software.The RCCMD is an application that allows the simultaneous and secure shutdown of the 95% of existing platforms. Like the most comprehensive monitoring software, the RCCMD can send messages or commands to different clients of the network.

UNMS II Software

For those networks which have more than one UPS to feed it and it requires a concentration monitoring from a single command post, UNMS II software (UPS Network Managament System) is the ideal solution. UNMS II allows managing multiple installations of all those units that have an Ethernet adapter SNMP / Web Adapter and / or sensors. UNMS II packages are available in 9, 25, 50 or 150 licenses.

BACS II

Monitoring, managing and alarm system for lead-acid batteries. Ensures the full operation of the battery system, preventing unexpected or unnoticed failures caused by defective batteries. System Components: WebManager, battery modules, associated bus

Ethernet/SNMP Web Adapter

SNMP adapter to integrate the equipment in a IT network by using an IP address. It includes adapter, CD with programming software, configuration cable, MIB (Management Information Base) and user manual. Available in card or box formats.

Temperature and humudity sensor

Probe to measure the magnitude of the battery ambient temperature and humidity of the equipment

Battery modules

For backup requirements greater than standard, one or several battery modules connected to the UPS can be installed.

Protection rating IP21

Enclosure with IP21 protection rating in accordance with standard IEC 60529 Degrees of Protection.

Backfeed protection

Backfeed protection provides additional protection to the input in the event that the bypass thyristors suffer a short circuit. Use of the internal backfeed contactor in the bypass line provides security in fault situations occurring in the static bypass line and prevents power from rising in the input.

Cable for parallel installations

Communications cable for simple or redundant parallel installations.

Separate bypass line

 For facilities with dual power supply, enabling the separation of inverter and bypass line power supplies.

Input/output voltage configurations

Consult us for possible single/single-phase, three/single-phase and single/three-phase input/output configurations.

External manual bypass

External Manual Bypass to make maintenance tasks, by isolating the equipment electrically. Bypass type make Before break

Autotranformer for other voltages

It used to adapt the equipment to other different nominal voltages 3x380 / 400/415 + N V.

Isolation transformer

Electrical device that provides galvanic isolation between input and output, and adjust tension.

Remote control

Remote panel shows the status of the UPS, in real time, by means of a touch screen, through the RS485 communication port.